3. Galvanised steel and Zincalume must be primed before application of Resene Lumbersider. Resene Lumbersider is formulated to adhere to fresh timber surfaces. ... A coat of solventborne Resene Wood Primer (see Data Sheet D40) will slow down the rate of drying and lessen the danger of warping.

Is resene a self priming?

Due to the rough profile we recommend Resene Lumbersider, which has the added benefit of being self priming, although Resene Sonyx 101 is also an option if a more cleanable surface is required – especially over old painted band sawn timber.

What is Lumbersider paint used for?

A waterborne low sheen paint based on a tough waterborne resin that ensures maximum durability. It imparts a natural low sheen look that is fully washable. Ideal for use on a wide range of exterior projects, though very popular as a fence paint finish. For interior/exterior use.

What is resene Lumbersider?

Resene Lumbersider is a waterborne low sheen finish based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable.

Is Lumbersider oil based?

Resene Lumbersider is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions.

Painting weatherboards with Resene Hi-Glo, Sonics or Lumbersider

Is resene paint any good?

On the upside Resene is easy to work with and forgiving of mistakes, it looks good too and Resene have a huge range of really nice colours. On the downside it tends to run a little too easily and it can splatter making a mess. I consider the extensive use of drop sheets with this paint essential.

What is Lumbersider?

Product Description. Resene Lumbersider is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Typical uses: - Beams.

What is Lustacryl paint?

Resene Lustacryl is a waterborne, semi-gloss, exterior and interior decorative topcoat, available in a wide range of colours or can be colour matched to your requirements. Tinted with non VOC tinters, Resene Lustacryl is the result of long, careful, intensive research.

What is resene TimberLock?

Resene TimberLock is a multi-functional timber treatment designed to increase the water, fungal and U.V. resistance of the wood surface itself, improving the performance of subsequently applied finishes. ... Typical uses: New timber – exterior, timber – interior/wet areas, weathered timber.

Can you use Lumbersider on concrete?

Resene Lumbersider is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. substrates, timber, concrete and old paintwork.

How long does resene Sureseal take to dry?

45 minute touch dry. Recoat after 3 hours. Clean up using mineral turpentine.

Do you need to prime previously painted wood?

Previous Coat is Glossy

Paints do not stick well to glossy surfaces, whether already painted or not. ... You may need an undercoat for wood, but there is no need to apply any primer, as the surface is already painted.

Is resene paint water based?

Resene Lumbersider is a waterborne low sheen paint based on a tough waterborne resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Ideal for use on a wide range of exterior projects. Also popular as a fence paint finish.

What Colour is resene Alabaster?

Colour values

Resene Alabaster is a near white with a light blackened edge.

How do you use resene smooth surface sealer?

Apply a thin coat of Resene Waterborne Smooth Surface Sealer and allow to cure without water contact for at least 48 hours before overcoating. Then apply two coats of Resene SpaceCote Low Sheen. Roll all coats using the recommended roller sleeve.

What is black white paint?

Colour values

Resene Black White is a calcite grey white, chalky and soft.

What is Zylone Sheen?

Resene Zylone Sheen is the result of advanced technology that produces a smooth yet ultra tough surface. Drying to an attractive low sheen finish, its ease of application, washability and durability make it an ideal choice for interior use. A very low odour product.

What is resene x200?

Resene X-200 is an acrylic weathertight membrane incorporating the most recent advances in polymer and paint technology. Shows significant advances in the areas of film build, adhesion, penetration, application and durability. Perfect for concrete blocks, concrete surfaces, fibre reinforced cement. For exterior use.

Can you waterproof plaster?

Plaster is a material used in several applications, including siding, interior and exterior walls, and decorative pieces. ... It is possible to waterproof an outdoor plaster statue in order to preserve it and protect it from the elements for several years to come.

What is elastomeric paint?

Elastomeric paint is a coating specifically made to protect masonry surfaces. Like other paints, it is applied in liquid form, which then hardens into a flexible, watertight covering. This paint can stretch and return to its original form without causing damage if applied correctly.

How long does resene paint take to cure?

For best results roll apply the Resene Lustacryl. This will give a slightly textured finish. The adhesion and cure of the system will take a minimum of five days to develop. For at least the first 48 hours after application of the waterborne enamel finish try to avoid water contact with the new paint.