Some fiberglass pool shells are made with lower quality materials that may be less durable over time. But even with a well-manufactured fiberglass pool, you can wear down the surface by using harsh chemicals and not maintaining it properly. In these cases, when the gelcoat wears down, it will need to be refinished.

How often do you have to resurface a fiberglass pool?

It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced every 3-7 years while fiberglass pools can sometimes go as long as 15-30 years.

How many years does a fiberglass pool last?

Most fiberglass pools are known to last 25-30 years, but we take that to the next level. Our manufacturer, Narellan Pools, makes the best fiberglass pools around. Their unique fiberglass formula results in a pool that can last as long as 50 years! Plus, these pools are notoriously easy to maintain.

How much is it to resurface a fiberglass pool?

Resurfacing Fiberglass Pool Cost

Most homeowners spend between $6,000 and $8,000 to resurface a fiberglass pool. The only real difference between costs for fiberglass and concrete is that many builder-owners choose a paint finish for fiberglass. A paint finish typically costs $1,000-$2,000.

How often do you have to re gelcoat a fiberglass pool?

Every 10–15 years, you need to replaster the pool and replace the waterline tile. Booo. A gelcoat is much less porous, so algae doesn't bother it. With proper manufacturing and maintenance, it will never need to be refinished.

Fiberglass Pool Resurface

Can you recoat a fiberglass pool?

Replacing a fiberglass swimming pool is also very expensive. ... If you have an old fiberglass swimming pool you can resurface it with this fiberglass gel. You can resurface newer pools as well to change the color or for added protection.

Can you renovate a fibreglass pool?

If your pool is going through deterioration, fibreglass renovation experts remove the old top coat and repair the pool by eliminating osmosis, cracks and other issues, and apply a new layer of fibreglass to the pool which makes its smooth, non-permeable and dramatically sturdier than before.

What happens if you don't resurface your pool?

If you don't resurface the pool, which is necessary because it is always exposed to weather, cracks and an unevenness in the pool surface will occur and this could lead to algae stains, water leaking and injuries from the uneven surface.

How much does it cost to resurface a 10000 gallon pool?

Re-plastering the interior surface of an average residential in-ground pool (10,000-20,000 gallons or 14'x28' to 16'x32' and 3.5'-5' deep) with standard white plaster or marble-dust plaster (marcite) typically costs $2,500-$5,500, depending on the size, depth and shape of the pool, and local rates.

Can I resurface my pool myself?

If your pool liner color is looking faded or stained, you may want to consider pool resurfacing. Depending on the type of inground pool you have, such as concrete or fiberglass, resurfacing might be a project you can DIY.

What are the disadvantages of a fiberglass pool?

• Poor installation practices can impact the quality of your pool. ...
• The fiberglass can interfere with the quality of the water. ...
• There is still a significant cost to consider when installing a pool. ...
• Fiberglass pools are prefabricated. ...
• The fiberglass can be susceptible to warping issues.

Why fiberglass pools are bad?

A Common Gripe About Fiberglass Pools

One of the biggest gripes that we see have to do with the slippery surface of a fiberglass pool. The fact is, this material can be so slick that pool users can actually slip and fall. This can be a real problem for pool steps, where a slip-and-fall accident can be dangerous.

Is a fiberglass pool worth the money?

Both are considered top-tier pool building materials. ... That said, in terms of total cost of ownership, it's worth noting that maintaining a fiberglass pool is generally cheaper. That's because fiberglass is more algae resistant, and therefore could save you money on chemicals over the life of the pool.

Can you empty a fiberglass pool?

Big disclaimer: only authorized fiberglass pool professionals should drain a pool. Never drain a pool without professional assistance. For most (if not all) pool manufacturers, an authorized dealer must drain the pool, or you may void your warranty.

Can a crack in a fiberglass pool be repaired?

For minor cracks, simply cover it with fiberglass paint. ... For more severe cracks, generally cracks that measure between ½-inch deep and extend 1-inch in length on both sides, the crack and surrounding area may need to be sanded down, with any loose particles removed.

What is Diamond Brite?

Diamond Brite® finishes are blends of selected quartz aggregates and fortified white Portland cement ideal for new or re-finished swimming pools. Diamond Brite® finishes are factory blended to provide the pool owner with an extremely durable and attractive alternative to traditional pool coatings.

How much does it cost to Marcite a pool?

Labor and materials to finish a pool with plaster (also called marcite) will cost $5,500. The pros and cons of this finish are: Pro: Least expensive.

Is Pebble Tec worth?

Overall. Pebble Tec pools are works of stunning beauty that can last for decades. They are an excellent choice for any pool. Once established, they're easy to maintain.

How do I know if my pool needs to be resurfaced?

1. Plaster Flaking or Peeling. Maybe you've noticed the plaster is peeling along the steps or floor of your pool or spa. ...
2. Surface Stains. ...
3. Roughness. ...
4. Check Cracks. ...
5. Plaster Discolorations. ...
6. Structural Cracks. ...
7. Rust Stains. ...
8. Loss of Pebbles.

How important is it to resurface a pool?

Resurfacing can repair problems like cracks and wearing, while also enhancing and updating your pool's appearance. While not needed as often as other services, resurfacing should still be on your list of pool maintenance tasks.

How often does a pool need to be replastered?

News. While commercial pools should be replastered about every 10 years or so, the rules aren't as clear for residential pools. How do you know when it's time to replaster your pool? The best answer – when your pool shows visible signs the plaster is deteriorating.

Can you repaint a fibreglass pool?

Epoxy swimming pool paint can be applied to new or old fibreglass pools alike. If you are painting an old pool, however, the professional applying the new paint finish can also solve any other problems that you may have with your pool, such as leaks, cracks, osmosis, rust and mould.

How much does it cost to re gelcoat a pool?

If you're using a product like ecoFINISH to resurface your swimming pool, you can expect to pay about as much as you would to refinish your pool with plaster. To give you a rough estimate, you can replaster a small 12x24 inground pool for about $10,000 and up.

Why is my fiberglass pool Chalky?

A white film forming on the walls of the pool is clouding the water. The white film is also filling the filter, and the filter has to be cleaned constantly. ... This can happen to any fiberglass pool because of age, excessive chemical treatment (especially overchlorination) or most commonly, a combination.

What is the maintenance on a fiberglass pool?

Fiberglass Pool Cleaning

The best way to clean a fiberglass pool is similar to any inground swimming pool, which includes regular brushing, skimming and vacuuming. However, the smooth, gel-coat surface requires less brushing and overall cleaning, performed with a much gentler touch.